Julixing Instruments

Julixing Instruments

 
Julixing Instruments

Company News

IEC60884-1 2002-06, Edition 3.0 List Apparatus

IEC60884-1 2002-06, Edition 3.0 List Apparatus

TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING

IEC 60884-1:2002-06, Edition 3.0

Plugs and socket-outlets for household and similar purposes -
Part 1: General requirements

R=Required by Lab       S=May be subcontracted         3PPS=Three Phase Power Supply required

Clause

Measurement/testing

Testing / Measuring equipment / Material needed / Safe equipment

Subcontracting

8.8

Test of markings

Water, petroleum spirit

R

9

Checking of dimensions

Caliper, micrometer, gauges

Caliper, micrometer, plugs and sockets testing gauge (12units)

R

10

Protection against electrical shock

Jointed test finger, unjointed testfinger, electrical indicator,
Figures 9 and 10: Gauges for checking non-accessibility of live parts, through shutters, and of live parts of socket-outlets with increased protection,

Test plug

Jointed test finger

Unjointed test finger

Electrical indicator

Figures 9: Probes of 20N

Figures 10: Probes of 1N

R

11.5

Measuring of contact resistance

AC source, measuring instruments

AC source

R

12.2

Tests on screw terminals

Screw driver and spanner with torque meter, weights,
Figure 11: Arrangement for checking damage to conductors

Figure 11: Arrangement for checking damage to conductors

R

12.3

Tests on screwless terminals Weights

Figure 11: Arrangement for checking damage to conductors,
AC source, measuring instruments,
Figure 12: Deflection test apparatus

Figure 11: Arrangement for checking damage to conductors

Figure 12: Deflection test apparatus of screwless terminals

R

13.14

Lateral strain of socket-outlets

Figure 13: Device for checking the resistance to lateral strain

Socket &Plug Pull Strength and Transverse Stress tester

R

13.23
13.24

Test on membranes

Heating cabinet, Freezer

Heating cabinet, Freezer

R

14.2

Test of non-solid pins

Figure 14: Device for testing of non-solid pins

Figure 14: Device for testing of non-solid pins 100N

R

14.23.1

Temperature rise test on plugs of plug-in equipments

AC source, measuring instruments, temperature measuring device

Temperature rise testing on plugs of plug-in equipments

R

14.23.2

Torque test on plugs of plug-in-equipment

Apparatus for the torque test

Apparatus for the torque test on plug

R

16.1

Ageing test

Heating cabinet, humidity chamber,

Heating cabinet, humidity chamber

R

16.2

Ingress of water

Test devices according to IEC 60529

IPX1-6 tester

Figure 15: Test wall in accordance with the requirements of 16.2.1

Test wall

R

16.3

Humidity treatment

Humidity chamber

Humidity chamber

R

17.1

Insulation resistance

Insulation test equipment

Insulation test equipment

R

17.2

Electric strength

High voltage test equipment

High voltage test equipment

R

19

Temperature rise

AC source, measuring instruments, temperature measuring device, test block for flush-mounted accessories

Temperature rise testing on plugs of plug-in equipments

R

20
21

Breaking capacity

Normal operation

Figure 16: Apparatus for breaking capacity and normal operation,
AC source, adjustable load (resistors and inductors), measuring instruments,
Figure 9: Gauge for checking non-accessibility of live parts, through shutters, after normal operation test,
Figure 10: Gauge for checking non-accessibility of live parts, through shutters, and of live parts of socket-outlets with increased protection

Figure 16: Apparatus for breaking capacity and normal operation test

Figures 9: Probes of 20N

Figures 10: Probes of 1N

R

3PPS

22.1

Verification of the maximum withdrawal force

Figure 18: Apparatus for checking the withdrawal force, test-plug

Socket &Plug Pull Strength and Transverse Stress tester

R

22.2

Verification of the minimum withdrawal force

Figure 19: Gauge for the verification of the minimum withdrawal force

Socket &Plug Pull Strength and Transverse Stress tester

R

23.2

Test of the cord retention

Figure 20: Apparatus for testing the cord retention,
Apparatus for the torque test

Apparatus for cord retention testing

R

23.4

Flexing test

Figure 21: Apparatus for flexing test

Plug and Cord Flexibility Tester

R

24.1

Impact test

Figures 22, 23, 24, 25 and 26: Impact-test apparatus

Pendulum impact test apparatus

R

24.2

Tumbling barrel test

Tumbling barrel according to IEC 60068-2-32

Tumbling barrel test machine

R

24.3

Test on ordinary surface-type socket-outlets

Cylinder of rigid steel sheet,
flat steel sheet

Apparatus test on ordinary surface-type socket-outlets

R

24.4

Impact test at low temperature

Figure 27: Apparatus for impact test at low temperature

Apparatus for impact test at low temperature

R

10.1
24.5

Impact test at low temperature\

Figure 38: Arrangement for compression test

Apparatus for compression test

R

24.6

Test on screwed glands

Metal rods,
test-spanner with torque meter

Torque

R

24.7

Abrasion test

Figure 28: Apparatus for abrasion test on insulating sleeves of plug pins

Apparatus for abrasion test on insulating sleeves of plug pins

R

24.8

Test on shutters

Test-pin, electrical indicator

Apparatus Test-pin test on shutters

R

24.9

Test on multiple portable socket-outlets

Figure 29: Arrangement for mechanical strength test on multiple portable socket-outlets

Arrangement for mechanical strength test on multiple portable socket-outlets

R

24.10

Test of the fixing of the pins

Figure 30: Example for test arrangement to verify the fixation of pins in the body of the plug

Apparatus for test arrangement to verify the fixation of pins in the body of the plug

R

24.11
24.12
24.13

Test on portable socket-outlets with suspension means

Cylindrical steel rod

Apparatuses test on portable socket-outlets with suspension

R

24.14
up to
24.18

Removal of covers or cover-plates Weights

Figure 31: Arrangement for test on covers or cover-plates,
Figure 32: Gauge for the verification of the outline of covers or coverplates,
Figure 35: Gauge for verification of grooves, holes and reverse tapers

Gauge for the verification of the outline of covers or coverplates,

Gauge for verification of grooves, holes and reverse tapers

R

25

Resistance to heat

Heating cabinet,

Figure 37: Ball pressure test apparatus

Figure 38: Apparatus for compression test for the verification of resistance to heat

Apparatus for compression test

R

26

Screws, current carrying parts and connections

Screw-driver and spanner with torque meter

Screw-driver and spanner with torque meter

R

27

Creepage distances, clearances

Caliper,
tolerances gauges

Creepage Gauge

R

28.1.1

Glow-wire test

Test apparatus according to IEC 60695-2-10

Glow-wire tester

R

28.1.2

Test of the resistance to heat of pins with insulating sleeves

Figure 40: Apparatus for testing resistance to abnormal heat of insulating sleeves of plug pins

Apparatus for testing resistance to abnormal heat of insulating sleeves of plug pins

R

28.2

Resistance to tracking

Test apparatus according to IEC 60112

Tracking tester

R

29

Resistance to rusting

Chemicals,
humidity cabinet, heating cabinet

R

30.1

Pressure test at high temperature

Figure 41: Apparatus for pressure test at high temperature,
Heating cabinet

Apparatus for pressure test at high temperature

R

30.2

Static damp heat test

Climatic chamber according to IEC 60068-2-30

R

30.3

Test at low temperature

Freezer

R

30.4

Impact test at low temperature

Figure 42: Impact test apparatus on pins provided with insulating sleeves

Apparatus for impact test at low temperature

R

Note:  The presence of equipment alone does not indicate a satisfactory situation.  Assessors must evaluate the equipment design, calibration, uncertainty and documentation to ensure compliance with the directions of the standard.  The requirements of ISO Guide 25 regarding validation are applicable, as the tests of this standard are not standardized tests.


    Standard:       IEC 61032 IEC 60061 IEC 60335 IEC 60529 IEC 60068 IEC 60695 VDE 0620 UL AS/NZS3112
    TAG:
IEC Test Probe Go No Go Gauge Spring Impact Hammer Integrating Sphere UL Probe Test IP Tester Test Equipment
 
Glow Wire Tester Impact Test Hammer Go Gauge UL Test Finger Probe Hipot Tester Test Probe Needle Impact Testing Machine
  Español   Español Svenska   Svenska لعربية   لعربية русский   русский Português   Português 中国  中国 Polski   Polski Română   Română Dansk   Dansk suomi   suomi
  Français   Français hrvatski   hrvatski Ελληνικά   Ελληνικά Nederlands   Nederlands česky   česky Deutsch   Deutsch 日本の   日本の Italia   Italia български   български นไทย   นไทย
test probe