contact us
products
- Main Products
- IEC Test Probe
- UL Test Probe
- Material Flammability Tester
- IP Code Tester
- Impact Test Apparatus
- Security Testing Machine
- Lamp Cap Gauge Tester
- Lampholders Gauge Tester
- Plug & Socket Tester
- Electrical Safety Tester
- LED Test Instruments
- Environmental Test Equipment
- Instrument Accessories
- Weighing Sensor
- Others Testing Equipment
technical articles
Fun ptoduct
- Horizontal Vertical Flame Test for Lab Testing Equipment
- Item LX-S16
The CX Horizontal-Vertical Flame Chamber Tester is a fully automatic instrument contained in its own cabinet to maximize the safety of the operator. It screening procedure for comparing the relative burning behaviour specimens made from plastic and other non-metallic materials, exposed to a flame ignition source of 50W or 500W nominal power. These test methods determine the linear burning rate and the afterflame/afterglow times, as well as the damaged length of specimens. They are applicable to solid and cellular materials that have an apparent density of not less than 250kg/m3, determined in accordance with ISO845. Then do not apply to materials that shrink away from the applied flame without ignition; ISO9773 should be used for thin flexible materials. And it's the combustion test device of plastic materials represented by UL-94. It can perform each test of HB, V0 to V2, 5V and VTM, HBF.
Includes: Flame height gauge and 100% absorbent cotton
| Model | LX-HV50 | LX-HV500 | LX-HV1000 | LX-UL94 |
| Test Flame | 50W(burning test for V-0, V-1, V-2 classification) | 500W(burning test for 5VA, V5VB classification) | 1000W | 50W and 500W |
| Burner Tube | Internal diameter: Φ 9.5mm± 0.3mm, length: 100mm± 10mm | Internal diameter: Φ 9.5mm± 0.3mm, length: 100mm± 10mm | Internal diameter: Φ 12mm± 0.1mm, length: 110mm± 0.1mm | Internal diameter: Φ 9.5mm± 0.3mm, length: 100mm± 10mm |
| Burning Angle | 0° , 20° , 45° | 0° , 20° , 45° | 0° , 20° , 45° | 0° , 20° , 45° |
| Thermocouple | Type K (Ni/Cr - Ni/Al) | Type K (Ni/Cr - Ni/Al) | Type K (Ni/Cr - Ni/Al) | Type K (Ni/Cr - Ni/Al) |
| Thermocouple Size O/D | 0.5 mm | 0.5 mm | 0.5 mm | 0.5 mm |
| Standard Copper Block | Φ 5.5mm± 0.01mm, weight: 1.76g± 0.01g before drilling. Cu-ETP | Φ 9mm± 0.01mm, weight: 10g± 0.05g before drilling. Cu-ETP | Φ 9mm± 0.01mm, weight: 10g± 0.05g before drilling. Cu-ETP | Φ 5.5mm± 0.01mm, weight: 1.76g± 0.01g before drilling. AndΦ 9mm± 0.01mm, weight: 10g± 0.05g before drilling. Cu-ETP |
| Time for Temperature to Increase | From 100° C± 5° C to 700° C± 3° C; 44s± 2s (preset) | From 100° C± 5° C to 700° C± 3° C; 54s± 2s (preset) | From 100° C± 5° C to 700° C± 3° C; 45s± 5s (preset) | From 100° C± 5° C to 700° C± 3° C; 54s± 2s and 54s± 2s(preset) |
| Overall Height | 18mm~22mm(adjustable) | 38mm~42mm(adjustable) | 50mm~60mm(adjustable) | 20± 2mm/40± 2mm(adjustable) |
| Gas Supply(do not provide) | methane, min. 98% purity | methane, min. 98% purity | propane, min. 98% purity, and air | methane, min. 98% purity |
| Flowmeter | 105± 10ml/min | 965± 30ml/min | 650± 30ml/min, 10± 0.5l/min | 105± 10ml/min and 965± 30ml/min |
| Manometer | 0KPa to 7.5KPa | 0KPa to 7.5KPa | 0 MPa to 0.1MPa | 0KPa to 7.5KPa |
| Input Power | 220 V 50 Hz 3A or 115 V 60Hz Optional | 220 V 50 Hz 3A or 115 V 60Hz Optional | 220 V 50 Hz 3A or 115 V 60Hz Optional | 220 V 50 Hz 3A or 115 V 60Hz Optional |
| Volume Of Chamber | > 0.75m³ , black interior | > 0.75m³ , black interior | > 1m³ , black interior | > 0.75m³ , black interior |
| Outer Dimensions | W*D*H=1192*580* 1190mm |
W*D*H=1192*580* 1190mm |
W*D*H=1220*700 *1500mm |
W*D*H=1192*580* 1190mm |
| Conform to standard |
UL94, IEC60695-11-4, IEC60695-11-10 |
UL94, IEC60695-11-3, IEC60695-11-20 |
IEC60695-11-2 | UL94, IEC69695-11-3/4, IEC60695-11-10/20 |
Shenzhen Julixing Instruments Co., Ltd. are specialized in manufacturing
special, custom built, test and measuring equipment for products testing as per international norms and
offering calibration services and related information. Our products and services are used by research & development
establishments, test laboratories, defense establishments, government institutions & manufacturing industries to fulfill the clients'
requirements.
If you require equipment to
test products such as home appliances, electrical accessories like switches, sockets, connectors, etc.
industrial & road lighting luminaires, automobile lighting systems or related
categories, we can provide the solutions you need.
We would appreciate your comments on the layout design,
presentation or other aspects of our website.
Website: http://www.china-item.com
Contacts: Eason Wang
E-mail: sales@china-item.com
TEL: +86-755-33168386
Phone: +86-13751010017
SKYPE: carlisle.wyk
TradeManager: cn112384072
Address: 1F Junfeng Building, Gongle, Xixiang, Baoan District, Shenzhen, Guangdong, China
ZIP: 518102
Website: http://www.china-item.com/
